Datasheet
Table Of Contents
- FEATURES
- APPLICATIONS
- DESCRIPTION
- ABSOLUTE MAXIMUM RATINGS
- PACKAGE SPECIFICATIONS
- ELECTRICAL CHARACTERISTICS
- ELECTRICAL CHARACTERISTICS
- PTV12010W Characteristic Data; 1.2 V to 5.5 VThe electrical characteristic data has been developed from actual products tested at 25°C. This data is considered typical for the converter. Applies to , , and .The temperature derating curves represent the conditions at which internal components are at or below the manufacturer's maximum operating temperatures. Derating limits apply to modules soldered directly to a 100 mm x 100 mm double-sided PCB with 2 oz. copper. Applies to , , and .
- PTV12010L Characteristic Data; 0.8 V to 1.8 VThe electrical characteristic data has been developed from actual products tested at 25°C. This data is considered typical for the converter. Applies to , , and .The temperature derating curves represent the conditions at which internal components are at or below the manufacturer's maximum operating temperatures. Derating limits apply to modules soldered directly to a 100 mm x 100 mm double-sided PCB with 2 oz. copper. Applies to .
- DEVICE INFORMATION
- APPLICATION INFORMATION
- Features of the PTH Family of Non-Isolated Wide Output Adjust Power Modules
www.ti.com
*See the application information for capacitor recommendation.
#R
SET
is Required to adjust the output voltage higher than its lowest value. See the application information for values.
Inhibit
GND GND
0.05 W
1%
C2*
Ceramic
C3*
PTV12010
6 4
2, 38
7
GND
V
I
10-mF
100-mF
V
I
V
O
Inhibit
1
5
Track
+
L
O
A
D
Adj
(Optional)
C1*
100-mF
+
(Required)
(Required)
(Required)
Track
V
O
V
O
R
SET
#
ABSOLUTE MAXIMUM RATINGS
PACKAGE SPECIFICATIONS
PTV12010L
PTV12010W
SLTS234B – DECEMBER 2004 – REVISED FEBRUARY 2007
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
STANDARD APPLICATION
ORDERING INFORMATION
PTV12010 (Basic Model)
Output Voltage Part Number DESCRIPTION Package
(1)
1.2 V – 5.5 V (Adjustable) PTV12010WAH Horizontal T/H EVA
0.8 V – 1.8 V (Adjustable) PTV12010LAH Horizontal T/H EVA
(1) See the applicable package drawing for dimensions and PC board layout.
over operating free-air temperature range unless otherwise noted
(1)
UNIT
V
(Track)
Track input –0.3 V to V
I
+0.3 V
T
A
Operating temperature range Over V
I
range –40°C to 85°C
Lead temperature 5 seconds 260°C
(2)
T
stg
Storage temperature –55°C to 125°C
V
(Inhibit)
Inhibit (pin 12) input voltage –0.3 V to 7 V
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) This product is not compatible with surface-mount reflow solder processes.
PTV12010x (Suffix AH)
Weight 2.6 grams
Flammability Meets UL 94 V-O
Mechanical shock Per Mil-STD-883D, Method 2002.3, 1 ms, 1/2 sine, mounted 500 Gs
(1)
Mechanical vibration Mil-STD-883D, Method 2007.2, 20 Hz - 2000 Hz 15 Gs
(1)
(1) Qualification limit.
2
Submit Documentation Feedback