Datasheet
Table Of Contents
- FEATURES
- APPLICATIONS
- DESCRIPTION
- ABSOLUTE MAXIMUM RATINGS
- PACKAGE SPECIFICATIONS
- ELECTRICAL CHARACTERISTICS
- ELECTRICAL CHARACTERISTICS
- PTV12010W Characteristic Data; 1.2 V to 5.5 VThe electrical characteristic data has been developed from actual products tested at 25°C. This data is considered typical for the converter. Applies to , , and .The temperature derating curves represent the conditions at which internal components are at or below the manufacturer's maximum operating temperatures. Derating limits apply to modules soldered directly to a 100 mm x 100 mm double-sided PCB with 2 oz. copper. Applies to , , and .
- PTV12010L Characteristic Data; 0.8 V to 1.8 VThe electrical characteristic data has been developed from actual products tested at 25°C. This data is considered typical for the converter. Applies to , , and .The temperature derating curves represent the conditions at which internal components are at or below the manufacturer's maximum operating temperatures. Derating limits apply to modules soldered directly to a 100 mm x 100 mm double-sided PCB with 2 oz. copper. Applies to .
- DEVICE INFORMATION
- APPLICATION INFORMATION
- Features of the PTH Family of Non-Isolated Wide Output Adjust Power Modules
www.ti.com
Capacitor Table
PTV12010L
PTV12010W
SLTS234B – DECEMBER 2004 – REVISED FEBRUARY 2007
Table 4 identifies the characteristics of capacitors from a number of vendors with acceptable ESR and ripple
current (rms) ratings. The recommended number of capacitors required at both the input and output buses is
identified for each capacitor type.
Note: This is not an extensive capacitor list. Capacitors from other vendors are available with comparable
specifications. Those listed are for guidance. The RMS ripple current rating and ESR (at 100 kHz) are critical
parameters necessary to ensure both optimum regulator performance and long capacitor life.
Table 4. Input/Output Capacitors
Capacitor Characteristics Quantity
Capacitor Vendor,
Vendor
Working Max ESR Max. Irms Physical Optional
Type/Series
Value Input
Part Number
Voltage at 100 kHz Ripple Current Size Output
(Style)
(µF) Bus
(V) ( Ω ) at 85°C (mA) (mm) Bus
Panasonic, Aluminum 25 330 0.090 755 10 × 12.5 1 1 EEUFC1E331
FC (Radial) 35 180 0.090 755 10 × 12.5 1 1 EEUFC1V181
FK (SMD) 25 470 0.080 850 10 × 10.2 1 1 EEVFK1E471P
United Chemi-Con
PXA, Poly-Aluminum (SMD) 16 150 0.026 3430 10 × 7.7 1 ≤ 4 PXA16VC151MJ80TP
FP, Os-con (Radial) 20 120 0.024 3100 8 × 10.5 1 ≤ 4 20FP120MG
FS, OS-con (SMD) 20 100 0.030 2740 8 × 10.5 1 ≤ 4 20FS100M
LXZ, Aluminum (Radial) 35 220 0.090 760 10 × 12.5 1 1 LXZ35VB221M10X12LL
Nichicon, Aluminum
HD (Radial) 25 220 0.072 760 8 × 11.5 1 1 UHD1E221MPR
PM (Radial) 35 220 0.090 770 10 × 15 1 1 UPM1V221MHH6
Panasonic, Poly-Aluminum
WA (SMD) 16 100 0.039 2500 8 × 6.9 1 ≤ 5 EEFWA1C101P
S/SE (SMD) 6.3
(1)
180 0.005 4000 7.3 × 4.3 N/R
(2)
≤ 1 EEFSE0J181R (V
O
≤ 5.1V)
× 4.2
Sanyo
SVP, Os-Con (SMD) 20 100 0.024 >3300 8 × 12 1 ≤ 4 20SVP100M
SP, Os-Con 20 120 0.024 >3100 8 × 10.5 1 ≤ 4 20SP120M
TPE, Pos-cap (SMD) 10 220 0.025 >2400 7.3 × 5.7 1 ≤ 4 10TPE220ML
AVX, Tantalum, TPS (SMD) 10 100 0.100 >1090 7.3× 5.7×4.1 N/R
(2)
≤ 5 TPSD107M010R0100
10 220 0.100 >1414 7.3× 5.7×4.1 N/R
(2)
≤ 5 TPSV227M010R0100
25 68 0.095 >1451 7.3× 5.7×4.1 2 ≤ 5 TPSV686M025R0095
Kemet (SMD)
T520, Poly-Tant (SMD) 10 100 0.080 1200 7.3×5.7×4 N/R
(2)
≤ 5 T520D107M010AS
T495, Tantalum (SMD) 10 100 0.100 >1100 7.3×5.7×4 N/R
(2)
≤ 1 T495X107M010AS
Vishay-Sprague 10 150 0.090 1100 7.3×6×4.1 N/R
(2)
≤ 5 594D157X0010C2T
594D, Tantalum (SMD)
25 68 0.095 1600 7.3×6×4.1 2 ≤ 5 594D686X0025R2T
94SP, Organic (Radial) 16 100 0.075 2890 10 × 10.5 1 ≤ 2 94SP107X0016FBP
Kemet, Ceramic X5R (SMD) 16 10 0.002 — ≥ 1
(3)
≤ 5 C1210C106M4PAC
6.3 47 0.002 3225 mm N/R
(2)
≤ 5 C1210C476K9PAC
Murata, Ceramic X5R 6.3 100 N/R
(2)
≤ 3 GRM32ER60J107M
(SMD)
6.3 47 N/R
(2)
≤ 5 GRM32ER60J476M
0.002 — 3225 mm
16 22 ≥ 1
(3)
≤ 5 GRM32ER61C226K
16 10 ≥ 1
(3)
≤ 5 GRM32DR61C106K
TDK, Ceramic X5R (SMD) 6.3 100 N/R
(2)
≤ 3 C3225X5R0J107MT
6.3 47 N/R
(2)
≤ 5 C3225X5R0J476MT
0.002 — 3225 mm
16 22 ≥ 1
(3)
≤ 5 C3225X5R1C226MT
16 10 ≥ 1
(3)
≤ 5 C3225X5R1C106MT
(1) The voltage rating of this capacitor only allows it to be used for output voltages that are equal to, or less than, 5.1 V.
(2) N/R – Not recommended. The voltage rating does not meet the minimum operating limits.
(3) Ceramic capacitors are required to complement electrolytic types at the input and to reduce high-frequency ripple current.
11
Submit Documentation Feedback