Datasheet
STANDARD APPLICATION
C
I
560 µF
(Required)
R
SET
1%
0.05 W
PTV08T250W
6,7
13,14
20,21
10
17
3
12 18 19 4 5 11
1
2
15 9
V
I
V
O
16
Inhibit/
ProgUVLO
+Sense
–Sense
GND GND
TurboTransAutoTrack
V
O
Adj
8
V
O
V
I
AutoTrack
L
O
A
D
+Sense
–Sense
GNDGND
C
O
660 µF
(Required)
TurboTrans
R
TT
1%
0.05 W
(Optional)
C
OTT
(Optional)
ABSOLUTE MAXIMUM RATINGS
PTV08T250W
SLTS260E – OCTOBER 2005 – REVISED NOVEMBER 2008 ..........................................................................................................................................
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
A. R
SET
= Required to set the output voltage higher than the minimum value (see the electrical characteristic for values.)
ORDERING INFORMATION
For the most current package and ordering information, see the Package Option Addendum at the end of this datasheet, or see
the TI website at www.ti.com.
over operating free-air temperature range (unless otherwise noted)
UNIT
Signal input voltages Track control (pin 15) – 0.3 V to V
I
+ 0.3 V
T
A
Operating temperature range over V
I
range – 40 ° C to 85 ° C
Wave solder 260 ° C
T
wave
Surface temperature of module body or pins (5 seconds)
temperature
T
stg
Storage temperature – 55 ° C to 125 ° C
Mechanical shock Per Mil-STD-883D, Method 2002.3, 1 msec, Sine, mounted 500 G
Mechanical vibration Mil-STD-883D, Method 2007.2, 20 – 2000 Hz 15 G
Weight 16.6 grams
Flammability Meets UL94V-O
2 Submit Documentation Feedback Copyright © 2005 – 2008, Texas Instruments Incorporated
Product Folder Link(s): PTV08T250W