Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
RECOMMENDED OPERATING CONDITIONS
PACKAGE SPECIFICATIONS
PTN04050A
SLTS250 – SEPTEMBER 2005
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
For the most current package and ordering information, see the Package Option Addendum at the end of this datasheet, or see
the TI website at www.ti.com.
over operating free-air temperature range unless otherwise noted
all voltages with respect to GND (pin 1),
UNIT
T
A
Operating free-air temperature Over V
I
range –40°C to 85°C
Leaded temperature (H & D suffix) 20 seconds 260 ° C
Solder reflow temperature (S suffix) Surface temperature of module body or pins (20 sec) 235 ° C
Solder reflow temperature (Z suffix) Surface temperature of module body or pins (20 sec) 260°C
(2)
T
stg
Storage temperature –40°C to 125°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Moisture Sensitivity Level (MSL) rating Level-3-260C-168HR
MIN MAX UNIT
V
I
Input voltage 2.9 7 V
T
A
Operating free-air temperature –40 85 °C
P
O
Output power 6 W
PTN04050A (Suffix AH, AD, AS and AZ)
Weight 2.7 grams
Flammability Meets UL 94 V-O
Per Mil-STD-883D, Method 2002.3, 1 ms, ½ sine,
Mechanical shock 500 G
(1)
mounted
Horizontal T/H (suffix AH & AD) 20 G
(1)
Mechanical vibration Mil-STD-883D, Method 2007.2, 20-2000 Hz
Horizontal SMD (suffix AS & AZ) 15 G
(1)
(1) Qualification limit.
2
Submit Documentation Feedback