Datasheet

Features of the PTH Family of Non-Isolated Wide Output Adjust Power Modules
Introduction
PTH12060W/L
SLTS217H – MAY 2003 – REVISED DECEMBER 2008 .................................................................................................................................................... www.ti.com
The PTH/PTV family of non-isolated, wide-output adjustable power modules are optimized for applications that
require a flexible, high performance module that is small in size. Each of these products are POLA™ compatible.
POLA-compatible products are produced by a number of manufacturers, and offer customers advanced,
nonisolated modules with the same footprint and form factor. POLA parts are also ensured to be interoperable,
thereby, providing customers with second-source availability.
From the basic, Just Plug it In functionality of the 6-A modules, to the 30-A rated feature-rich PTHxx030, these
products were designed to be very flexible, yet simple to use. The features vary with each product. Table 5
provides a quick reference to the features by product series and input bus voltage.
Table 5. Operating Features by Series and Input Bus Voltage
Series Input Bus (V) I
O
(A) Adjust On/Off Over- Prebias Auto- Margin Output Thermal
(Trim) Inhibit Current Startup Track™ Up/Down Sense Shutdown
3.3 6 • • • • •
PTHxx050 5 6 • • • • •
12 6 • • • • •
3.3 / 5 10 • • • • • • •
PTHxx060
12 10 • • • • • • •
3.3 / 5 15 • • • • • • •
PTHxx010
12 12 • • • • • • •
5 8 • • • • •
PTVxx010
12 8 • • • • •
3.3 / 5 22 • • • • • • • •
PTHxx020
12 18 • • • • • • • •
3.3 / 5 18 • • • • • • •
PTVxx020
12 16 • • • • • • •
3.3 / 5 30 • • • • • • • •
PTHxx030
12 26 • • • • • • • •
For simple point-of-use applications, the PTH12050 (6 A) provides operating features such as an on/off inhibit,
output voltage trim, prebias start-up and overcurrent protection. The PTH12060 (10 A), and PTH12010 (12 A)
include an output voltage sense, and margin up/down controls. Then the higher output current, PTH12020 (18 A)
and PTH12030 (26 A) products incorporate overtemperature shutdown protection.
The PTV12010 and PTV12020 are similar parts offered in a vertical, single in-line pin (SIP) profile, at slightly
lower current ratings.
All of the products referenced in Table 5 include Auto-Track™. This feature was specifically designed to simplify
the task of sequencing the supply voltages in a power system. This and other features are described in the
following sections.
14 Submit Documentation Feedback Copyright © 2003 – 2008, Texas Instruments Incorporated
Product Folder Link(s): PTH12060W/L