Datasheet

PTH08T210W
www.ti.com
................................................................................................................................................... SLTS262I OCTOBER 2005 REVISED MARCH 2009
Table 1. Input/Output Capacitors
(1)
Capacitor Characteristics Quantity
Max Output Bus
Max.
Capacitor Vendor,
Ripple
Working Value ESR Physical Input
Type Series (Style)
TurboTrans
Current at Vendor Part No.
No
Voltage ( µ F) at 100 Size (mm) Bus
(Cap
85 ° C
TurboTrans
kHz
Type)
(2)
(Irms)
Panasonic 25 V 1000 0.043 > 1690 mA 16 × 15 1 2
(3)
N/R
(4)
EEUFC1E102S
FC (Radial) 25 V 1800 0.029 2205 mA 16 × 20 1 1
(3)
N/R
(4)
EEUFC1E182
FC(SMD) 25 V 2200 0.028 > 2490 mA 18 × 21,5 1 1
(3)
N/R
(4)
EEVFC1E222N
FK(SMD) 25 V 1000 0.060 1100 mA 12,5 × 13,5 1 2
(5)
N/R
(4)
EEVFK1V102Q
United Chemi-Con
PTB, Poly-Tantalum(SMD) 6.3 V 470 0.025 2600 mA 7,3x4,3x2.8 N/R
(6)
2 - 4
(3)
C 2
(2)
6PTB477MD8TER
LXZ, Aluminum (Radial) 25 V 680 0.068 1050 mA 10 × 16 1 1 - 3
(3)
N/R
(4)
LXZ25VB681M10X20LL
PS, Poly-Alum(Radial) 16 V 330 0.014 5060 mA 10 × 12,5 2 2 - 3 B 2
(2)
16PS330MJ12
PXA, Poly-Alum(SMD) 16 V 330 0.014 5050 mA 10 × 12,2 2 2 - 3 B 2
(2)
PXA16VC331MJ12TP
PS, Poly-Alum(Radial) 6.3 V 680 0.010 5500 mA 10 × 12,5 N/R
(6)
1 - 2 C 1
(2)
6PS680MJ12
PXA, Poly-Alum(Radial) 6.3 V 470 0.012 4770 mA 8 × 12,2 N/R
(6)
1 - 2 C 1
(2)
PXA6.3VC471MH12TP
Nichicon, Aluminum 25 V 470 0.070 985 mA 12,5 × 15 1 2
(3)
N/R
(4)
UPM1E471MHH6
HD (Radial) 25 V 470 0.038 1430 mA 10 × 16 1 2
(3)
N/R
(4)
UHD1E471MHR
PM (Radial) 35 V 560 0.048 1360 mA 16 × 15 1 2
(3)
N/R
(4)
UPM1V561MHH6
Panasonic, Poly-Alum 2.0 V 390 0.005 4000 mA 7,3 × 4,3 × 4,2 N/R
(6)
N/R
(6)
B 2
(2)
EEFSE0J391R(V
O
1.6V)
(7)
Sanyo
TPE, Poscap (SMD) 6.3 V 470 0.018 3500 mA 7,3 × 4,3 N/R
(6)
1 - 3 C 1
(2)
6TPE470MI
TPE Poscap(SMD) 2.5 V 470 0.007 4400 mA 7,3 × 4,3 N/R
(6)
1 - 2 B 2
(2)
2R5TPE470M7(V
O
1.8 V)
(7)
TPD Poscap (SMD) 2.5 V 1000 0.005 6100 mA 7,3 × 4,3 N/R
(6)
1 B 1
(2)
2R5TPD1000M5(V
O
1.8 V)
(7)
SA, Os-Con (Radial) 16 V 470 0.020 > 6080 mA 16 × 23 1 1 - 4 N/R
(4)
16SA470M
SP Oscon ( Radial) 10 V 470 0.015 > 4500 mA 10 × 11,5 N/R
(6)
1 - 3 C 2
(2)
10SP470M
SEPC, Os-Con (Radial) 16 V 470 0.010 > 4700 mA 10 × 13 1 1 - 2 B 1
(2)
16SEPC470M
SVPA, Os-Con (SMD) 6.3 V 470 0.020 4700mA 10 × 10,3 N/R
(6)
1 - 4
(3)
C 1
(2) (3)
6SVPA470M
(1) Capacitor Supplier Verification
Please verify availability of capacitors identified in this table. Capacitor suppliers may recommend alternative part numbers because of
limited availability or obsolete products. In some instances, the capacitor product life cycle may be in decline and have short-term
consideration for obsolescence.
RoHS, Lead-free and Material Details
See the capacitor suppliers regarding material composition, RoHS status, lead-free status, and manufacturing process requirements.
Component designators or part number deviations can occur when material composition or soldering requirements are updated.
(2) Required capacitors with TurboTrans. See the TransTrans Application information for Capacitor Selection
Capacitor Type Groups by ESR (Equivalent Series Resistance) :
a. Type A = (100 < capacitance × ESR 1000)
b. Type B = (1,000 < capacitance × ESR 5,000)
c. Type C = (5,001 < capacitance × ESR 10,000)
(3) Total bulk nonceramic capacitors on the output bus with ESR of 15m to 30m requires an additional 200 µ F of ceramic
capacitor.
(4) Aluminum Electrolytic capacitor not recommended for the TurboTrans due to higher ESR × capacitance products. Aluminum and higher
ESR capacitors can be used in conjunction with lower ESR capacitance.
(5) Output bulk capacitor ' s maximum ESR is 30 m . Additional ceramic capacitance of 200 µ F is required.
(6) N/R Not recommended. The voltage rating does not meet the minimum operating limits.
(7) The voltage rating of this capacitor only allows it to be used for output voltage that is equal to or less than 80% of the working voltage.
Copyright © 2005 2009, Texas Instruments Incorporated Submit Documentation Feedback 11
Product Folder Link(s): PTH08T210W