Datasheet

3.4 Determining and Setting the Printer Port Address
Software Guide
The parallel port address for your PC can be found by going to the Start menu and selecting the
Control Panel item in the Settings menu. When the Control Panels window opens, find the System
icon and double click it. From the System window, select the Device Manager tab by clicking on it
once. Scroll down the list of devices until you see the Ports entry. Double click on the Ports entry
to list the PC ports. One of the ports should be a Printer Port. Double click on the Printer Port entry
to open the Printer Port window. From the Printer Port window, select the Resources tab by clicking
on it once. The Input/Output Range is displayed (ex/ 0378 – 037F). Write down the starting number
in the range (ex/ 0378), and go to the Main panel of the evaluation module program and select the
port address that matches this number.
3.5 Programming the PGA4311: The DUT Panels
All controls for the PGA4311 are contained within the DUT1 and DUT2 control panels, as shown in
Figures 4 and 5. This section describes the functions contained within these panels.
Figure 4. The DUT1 Control Panel.
Figure 5. The DUT2 Control Panel.
3-3