Datasheet

SLDU010
TI CONFIDENTIAL – NDA Restrictions
Page 39 of 50
7.7.1 Input Compare 1 Region
The “Input Compare 1 Region” is used to activate and read from the Input Compare 1 peripheral
in the PGA400-Q1.
7.7.1.1 Activate IC1
The “Activate IC1” button activates the Input Compare 1 function in the PGA400-Q1 by
controlling bit 0 of ESFR 0xC7.
7.7.1.2 Read IC1
The “Read” button in the IC1 region is used to update the text box with the contents of the input
compare registers by reading ESFRs 0xC1 and 0xC2.
7.7.1.3 Falling/Rising Edge Selection Box
The “Falling/Rising Edge” selection box is used to change the polarity that the input compare
peripheral uses by controlling bit 1 of ESFR 0xC0.
7.7.2 Input Compare 2 Region
The “Input Compare 2 Region” is used to activate and read from the Input Compare 2 peripheral
in the PGA400-Q1.
7.7.2.1 Activate IC2
The “Activate IC2” button activates the Input Compare 2 function in the PGA400-Q1 by
controlling bit 1 of ESFR 0xC7.
7.7.2.2 Read IC2
The “Read” button in the IC2 region is used to update the text box with the contents of the input
compare registers by reading ESFRs 0xC3 and 0xC4.
7.7.2.3 Falling/Rising Edge Selection Box
The “Falling/Rising Edge” selection box is used to change the polarity that the input compare
peripheral uses by controlling bit 2 of ESFR 0xC0.
7.7.3 Output Compare 1 Region
The “Output Compare 1 Region” is used to activate and set/read the Output Compare 1
peripheral in the PGA400-Q1.
7.7.3.1 Activate OC1
The “Activate OC1” button activates the Output Compare 1 function in the PGA400-Q1 by
controlling bit 2 of ESFR 0xC7.