Datasheet

PGA400 EVM User Guide
TI CONFIDENTIAL – NDA Restrictions
Page 38 of 50
7.6.6.3 EEPROM Burst Write 2
The “EEPROM BURST WRITE 2” button will perform a burst write with the data that has been
entered into the textboxes under the “Write Data” label on the right side of the tab.
7.6.6.4 EEPROM Burst Read 2
The “EEPROM BURST READ 2” button will perform a burst read and then populate the data into
the textboxes under the “Read Data” with the data that has been entered into the textboxes
under the “Read Data” label on the right side of the tab.
7.7 IC/OC Tab
The “IC/OC” (Input Compare/Output Compare) tab on the GUI is used to read from and
configure the input and output compare registers on the PGA400-Q1. The tab is broken into five
main regions: Input Compare 1, Input Compare 2, Output Compare 1, Output Compare 2, and
Free Running Timer. An image of the tab along with a description of the buttons can be found
below.
Figure 29. IC/OC GUI Tab