Datasheet

SLDU010
TI CONFIDENTIAL – NDA Restrictions
Page 37 of 50
7.6.6 EEPROM Burst Write/Read Tab
The second tab on the bottom portion of the OWI tab is the “EEPROM Burst Write/Read” tab.
This tab is used to perform the EEPROM “Burst” write/read commands that the PGA400-Q1
supports. An image of the tab along with a description of the buttons can be found below.
Figure 28. EEPROM Burst Write/Read Tab
7.6.6.1 EEPROM Burst Write 1
The “EEPROM BURST WRITE 1” button will perform a burst write with the data that has been
entered into the textboxes under the “Write Data” label on the left side of the tab.
7.6.6.2 EEPROM Burst Read 1
The “EEPROM BURST READ 1” button will perform a burst read and then populate the data into
the textboxes under the “Read Data” with the data that has been entered into the textboxes
under the “Read Data” label on the left side of the tab.