Datasheet

PGA2310-EVM

SBOU012

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the absolute maximum supply voltage of ±16V and

the corresponding input/output voltage range of 29.0Vp-p. The device is industrial grade, so

it can be operated over the –40°C to +85°C temperature range.

Exceeding the specified input range may cause unexpected operation and/or irreversible

damage to the EVM. If there are questions concerning the input range, please contact a TI

field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or

possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to

connecting any load to the EVM output. If there is uncertainty as to the load specification,

please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than

+60°C. The EVM is designed to operate properly with certain components above +60°C as

long as the input and output ranges are maintained. These components include but are not

limited to linear regulators, switching transistors, pass transistors, and current sense

resistors. These types of devices can be identified using the EVM schematic located in the

EVM User’s Guide. When placing measurement probes near these devices during operation,

please be aware that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265