Datasheet

www.ti.com EVM Documentation
6 EVM Documentation
This section contains the complete bill of materials, schematic diagram, and PCB layout for the PGA112EVM and PGA113EVM. Documentation
information for the SM-USB-DIG Platform can be found in the SM-USB-DIG Platform User’s Guide, SBOU098, available for download at
www.ti.com.
6.1 PGA112EVM and PGA113 Bill of Materials
Table 3 lists the bill of materials for both the PGA112EVM and PGA113EVM test boards.
Table 3. EVM Bill of Materials
Quantity Value Ref Des Description Vendor Part Number
PGA112EVM and PGA113EVM
1 N/A J1 CONN SOCKET 10PIN .050 R/A SNGL Mill-Max Manu. Corp. 851-43-010-20-001000
2 N/A 1, 2 BUMPON CYLINDRICAL .375X.135 BLK 3M SJ61A8
AVDD, CH1, VCAL/CH0,
11 N/A CLK, CS, DIO, DVDD, TEST POINT, MINIATURE Keystone Electronics 5015
VOUT, VREF, GND(x2)
3 0.1 µF C1, C2, C3 CAPACITOR CER .1UF 16V, 0402 Murata Electronics North America GRM155R71C104KA88D
2 0 Ω R1, R2 RESISTOR, 0Ω, 0402 Yageo RC0402JR-070RL
3 10 kΩ R3, R4, R5 RESISTOR, 10KΩ, 0402, 1/16W, 5% Yageo RC0402JR-0710KL
1 N/A FB1 FERRITE BEAD, 300Ω, .2A, 0402 Wurth 74279272
PGA112EVM Only
1 N/A U1 PG112, Zero-Drift, Programmable Gain Amplifier with MUX, MSOP-10 Texas Instruments PGA112AIDGSR
PGA113EVM Only
1 N/A U1 PGA113, Zero-Drift, Programmable Gain Amplifier with MUX, MSOP-10 Texas Instruments PGA113AIDGSR
13
SBOU073A–February 2009–Revised May 2012 PGA112EVM and PGA113EVM User’s Guide
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated