Datasheet

EVM Software Overview www.ti.com
5.2.5 Setting the Input Multiplexer
The input multiplexer (mux) of the PGA112 (or PGA113) device can be set by the Input Mux drop-down
menu shown in Figure 14. External test points VCAL/CH0 and CH1 can be selected in this menu, as well
as the various calibration inputs.
Figure 14. Input Mux Configuration
5.2.6 Setting Gain
Use the Gain drop-down menu shown in Figure 15 to configure the PGA112 (or PGA113) device gain
value.
Figure 15. Setting the Gain
12
PGA112EVM and PGA113EVM User’s Guide SBOU073A–February 2009–Revised May 2012
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated