Datasheet

3
®
PGA103
SPECIFICATIONS (CONT)
ELECTRICAL
T
A
= +25°C, V
S
= ±15V, R
L
= 2kΩ unless otherwise specified.
PGA103P, U
PARAMETER CONDITIONS MIN TYP MAX UNITS
POWER SUPPLY
Voltage Range ±4.5 ±15 ±18 V
Current V
IN
= 0V ±2.6 ±3.5 mA
TEMPERATURE RANGE
Specification –40 +85 °C
Operating –40 +125 °C
θ
JA
: P or U Package 100 °C/W
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
Top View DIP/SO-8
PIN CONFIGURATION ABSOLUTE MAXIMUM RATINGS
Supply Voltage ................................................................................. ±18V
Analog Input Voltage Range ..................................................... V– to V+
Logic Input Voltage Range ........................................................ V– to V+
Output Short Circuit (to ground) ............................................ Continuous
Operating Temperature ................................................ –40°C to +125°C
Storage Temperature .................................................... –40°C to +125°C
Junction Temperature ...................................................................+150°C
Lead Temperature (soldering,10s) .............................................. +300°C
PACKAGE INFORMATION
PACKAGE DRAWING
MODEL PACKAGE NUMBER
(1)
PGA103P 8-Pin Plastic DIP 006
PGA103U SO-8 Surface-Mount 182
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix D of Burr-Brown IC Data Book.
1
2
3
4
8
7
6
5
V+
V
O
V–
NC
A
0
A
1
Ground
V
IN
ELECTROSTATIC
DISCHARGE SENSITIVITY
Any integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with ap-
propriate precautions. Failure to observe proper handling and
installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet published speci-
fications.
ORDERING INFORMATION
MODEL PACKAGE TEMPERATURE RANGE
PGA103P 8-Pin Plastic DIP –40°C to +85°C
PGA103U SO-8 Surface-Mount –40°C to +85°C