Datasheet

PCM9211
SBAS495 –JUNE 2010 www.ti.com
Register 2Ch, INT0 Output Register
(Address: 2Ch, Read-Only)
DATA B7 B6 B5 B4 B3 B2 B1 B0
Reg Name OERROR0 ONPCM0 OEMPHF0 ODTSCD0 OCSRNW0 OPCRNW0 OFSCHG0 RSV
Default Value N/A N/A N/A N/A N/A N/A N/A 0
Memo
OERROR0: ERROR Port Output Status
0: No ERROR
1: Detect ERROR
This register setting follows the register setting of the ERROR factor.
ONPCM0: NPCM Port Output Status
0: PCM data
1: Non-PCM data
This register setting follows the register setting of non-PCM data identification.
OEMPHF0: Emphasis Flag in Channel Status
0: No emphasis
1: Emphasis
ODTSCD0: DTS-CD/LD Detection
0: No DTS-CD/LD
1: DTS-CD/LD
This register setting follows the register setting for DTS-CD/LD detection conditions.
OCSRNW0: Channel Status Data of Beginning 48-bit Renewal
0: Not detect renewal
1: Detect renewal
OPCRNW0: Burst Preamble P
C
Renewal
0: Not detect renewal
1: Detect renewal
OFSCHG0: Renewal Flag of f
S
Calculator Result
0: Not detect renewal
1: Detect renewal
When this register is read, the INT0 output is cleared.
74 Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): PCM9211