Datasheet

PCM9211
www.ti.com SBAS495 –JUNE 2010
Register 25h, ERROR Cause Setting
(Address: 25h, Write and Read)
DATA B7 B6 B5 B4 B3 B2 B1 B0
Reg Name RSV RSV EFSCHG EFSLMT ENPCM EVALID EPARITY EUNLOCK
Default Value 0 0 0 0 0 0 0 1
Memo
The following ERROR Cause Setting registers are independent of the AUTO Source Selector Cause Setting
Register (Register 26h).
EFSCHG: DIR Sampling Frequency Change
0: Not selected (default)
1: Selected
EFSLMT: DIR Limiting Acceptable Sampling Frequency
0: Not selected (default)
1: Selected
The definition of receivable sampling frequency range depends on the f
S
Limit Setting Register.
ENPCM: Non-PCM
0: Not selected (default)
1: Selected
The definition of non-PCM is depend on the Non-PCM Definition Setting Register.
EVALID: Validity Flag
0: Not selected (default)
1: Selected
EPARITY: Parity Error
0: Not selected (default)
1: Selected
EUNLOCK: PLL Lock Error
0: Not selected
1: Selected (default)
This register is used for setting the ERROR output factor.
The required factors of ERROR set to '1' are selected based on OR logic.
Copyright © 2010, Texas Instruments Incorporated Submit Documentation Feedback 67
Product Folder Link(s): PCM9211