Datasheet

PCM9211
SBAS495 –JUNE 2010 www.ti.com
Register 6Eh, MPIO_C and MPIO_A Hi-Z Control
(Address: 6Eh, Write and Read)
DATA B7 B6 B5 B4 B3 B2 B1 B0
Reg Name MPC3HZ MPC2HZ MPC1HZ MPC0HZ MPA3HZ MPA2HZ MPA1HZ MPA0HZ
Default Value 0 0 0 0 1 1 1 1
Memo
MPC3HZ: MPIO_C3, Hi-Z Control
0: Defined by Group Function Assign register, 6Fh/MPCSEL. (default)
1: Hi-Z
MPC2HZ: MPIO_C2, Hi-Z Control
0: Defined by Group Function Assign register, 6Fh/MPCSEL. (default)
1: Hi-Z
MPC1HZ: MPIO_C1, Hi-Z Control
0: Defined by Group Function Assign register, 6Fh/MPCSEL. (default)
1: Hi-Z
MPC0HZ: MPIO_C0, Hi-Z Control
0: Defined by Group Function Assign register, 6Fh/MPCSEL. (default)
1: Hi-Z
MPA3HZ:M PIO_A3, Hi-Z Control
0: Defined by Group Function Assign register, 6Fh/MPASEL.
1: Hi-Z (default)
MPA2HZ:M PIO_A2, Hi-Z Control
0: Defined by Group Function Assign register, 6Fh/MPASEL.
1: Hi-Z (default)
MPA1HZ:M PIO_A1, Hi-Z Control
0: Defined by Group Function Assign register, 6Fh/MPASEL.
1: Hi-Z (default)
MPA0HZ:M PIO_A0, Hi-Z Control
0: Defined by Group Function Assign register, 6Fh/MPASEL.
1: Hi-Z (default)
NOTE
In multi-channel PCM mode, the MCHR and MPAxHz registers (20h) must be set to '0' to
get the outputs from the main port.
100 Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): PCM9211