Datasheet

MECHANICAL DATA
MPSS001 – MARCH 2001
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
DCV (R-PSOP-G24) PLASTIC SMALL-OUTLINE
C
D
M
0,10
0,10
0,65
4202107/A 03/01
Area
A
A
7,70
8,20
7,40
7,80
6,00 MAX
0,30
0,19
1,45 MAX
1,15 TYP
0,05
0,15
Gage
Plane
0,25 REF
0°-10°
0,30
0,70
Base
Metal
With
Plating
0,09
0,20
0,09
0,16
0,19
0,25
0,30
0,19
112
1324
Index
Seating Plane
C
E
Section A-A
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or
protrusions, but do include mold mismatch and are
measured at datum plane, mold parting line. Mold flash
or protrusion shall not exceed 0,20mm per side.
D. Lead width dimension does not include dambar protrusion/
intrusion. Allowable dambar protrusion shall be 0,13mm total
in excess of width dimension at maximum material condition.
Dambar intrusion shall not reduce width dimension by more
than 0,07mm at least material condition.
E. All dimensions in Section A-A apply to the flat section
of the lead between 0,10mm and 0,25mm from the lead tips.
F. A visual index feature must be located within the
cross-hatched area.