Datasheet

www.ti.com

DETAILED DESCRIPTION

USB INTERFACE

PCM2901

PCM2903

SLES034C – MARCH 2002 – REVISED NOVEMBER 2007

Control data and audio data are transferred to the PCM2901/2903 via D+ (pin 1) and D – (pin 2). All data to/from

the PCM2901/2903 is transferred at full speed. The device descriprtor contains the information described in

Table 1. The device descriptor can be modified on request; contact a Texas Instruments representative for

details.

Table 1. Device Descriptor

USB revision 1.1 compliant

Device class 0x00 (device-defined interface level)

Device subclass 0x00 (not specified)

Device protocol 0x00 (not specified)

Max packet size for end-point 0 8 bytes

Vendor ID 0x08BB (default value, can be modified)

Product ID 0x2901 / 0x2903 (default value, can be modified)

Device release number 1.0 (0x0100)

Number of configurations 1

Vendor strings String #1 (see Table 3 )

Product strings String #2 (see Table 3 )

Serial number Not supported

The configuration descriptor contains the information described in Table 2 . The configuration descriptor can be

modified on request; contact a Texas Instruments representative for details.

Table 2. Configuration Descriptor

Interface Four interfaces

Power attribute 0xC0 (Self-powered, no remote wakeup)

Maximum power 0x00 (0 mA. Default value, can be modified)

The string descriptor contains the information described in Table 3 . The string descriptor can be modified on

request; contact a Texas Instruments representative for details.

Table 3. String Descriptor

#0 0x0409

#1 Burr-Brown from TI (default value, can be modified)

#2 USB audio codec (default value, can be modified)

Product Folder Link(s): PCM2901 PCM2903