Datasheet

PCM2704C, PCM2705C
PCM2706C, PCM2707C
SBFS036A –AUGUST 2011–REVISED JULY 2012 www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
For the most current specification and package information, refer to the Package Option Addendum located at
the end of this data sheet or see the respective device product folders at www.ti.com.
ABSOLUTE MAXIMUM RATINGS
(1)
Over operating free-air temperature range unless otherwise noted.
VALUE UNIT
V
BUS
–0.3 to 6.5 V
Supply voltage
V
CCP
, V
CCL
, V
CCR
, V
DD
–0.3 to 4 V
Supply voltage differences V
CCP
, V
CCL
, V
CCR
, V
DD
±0.1 V
Ground voltage differences PGND, AGNDL, AGNDR, DGND, ZGND ±0.1 V
HOST –0.3 to 6.5 V
D+, D–, HID0/MS, HID1/MC, HID2/MD, XTI, XTO, DOUT,
Digital input voltage
SSPND, CK, DT, PSEL, FSEL, TEST, TEST0, TEST1, –0.3 to (V
DD
+ 0.3) < 4 V
FUNC0, FUNC1, FUNC2, FUNC3
V
COM
–0.3 to (V
CCP
+ 0.3) < 4 V
Analog input voltage V
OUT
R –0.3 to (V
CCR
+ 0.3) < 4 V
V
OUT
L –0.3 to (V
CCL
+ 0.3) < 4 V
Input current (any pins except supplies) ±10 mA
Ambient temperature under bias –40 to +125 °C
Storage temperature –55 to +150 °C
Junction temperature +150 °C
Package temperature (IR reflow, peak) +260 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Over operating free-air temperature range.
MIN NOM MAX UNIT
V
BUS
4.35 5 5.25
Supply voltage V
V
CCP
, V
CCL
, V
CCR
, V
DD
3 3.3 3.6
Digital input logic level TTL-compatible
Digital input clock frequency 11.994 12 12.006 MHz
Analog output load resistance 16 32 Ω
Analog output load capacitance 100 pF
Digital output load capacitance 20 pF
Operating free-air temperature, T
A
–25 85 °C
2 Submit Documentation Feedback Copyright © 2011–2012, Texas Instruments Incorporated
Product Folder Link(s): PCM2704C PCM2705C PCM2706C PCM2707C