Datasheet
www.ti.com
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
PCM1807
SLES147 – SEPTEMBER 2005
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated
circuits be handled with appropriate precautions. Failure to observe proper handling and installation
procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
over operating free-air temperature range (unless otherwise noted)
(1)
PCM1807
Analog supply voltage, V
CC
–0.3 V to 6.5 V
Digital supply voltage, V
DD
–0.3 V to 4 V
Ground voltage differences, AGND, DGND ±0.1 V
Digital input voltage, LRCK, BCK, DOUT –0.3 V to (V
DD
+ 0.3 V) < 4 V
Digital input voltage, MD, MC, MS, SCKI –0.3 V to 6.5 V
Analog input voltage, V
IN
L, V
IN
R, V
REF
–0.3 V to (V
CC
+ 0.3 V) < 6.5 V
Input current (any pins except supplies) ± 10 mA
Ambient temperature under bias, T
A
–40 ° C to 125 ° C
Storage temperature, T
stg
–55 ° C to 150 ° C
Junction temperature, T
J
150 ° C
Lead temperature (soldering) 260 ° C, 5 s
Package temperature (reflow, peak) 260 ° C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
over operating free-air temperature range (unless otherwise noted)
MIN NOM MAX UNIT
Analog supply voltage, V
CC
4.5 5 5.5 V
Digital supply voltage, V
DD
2.7 3.3 3.6 V
Analog input voltage, full scale (–0 dB) V
CC
= 5 V 3 Vp-p
Digital input logic family TTL compatible
Digital input clock frequency, system clock 4.096 49.152 MHz
Digital input clock frequency, sampling clock 16 96 kHz
Digital output load capacitance 20 pF
Operating free-air temperature, T
A
–40 85 ° C
2