Datasheet


SLES100A − DECEMBER 2003 − REVISED NOVEMBER 2006
www.ti.com
32
ZFGx: Zero-Detection Flag
Where x = L or R, corresponding to the DAC output channel. These bits are available only for readback.
Default value: 00
ZFGx = 0
Not zero
ZFGx = 1 Zero detected
These bits show zero conditions. Their status is the same as that of the zero flags at ZEROL (pin 1) and ZEROR
(pin 2). See Zero Detect in the FUNCTION DESCRIPTIONS section.
B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0
Register 23
R 0 0 1 0 1 1 1 RSV RSV RSV ID4 ID3 ID2 ID1 ID0
R: Read Mode Select
Value is always 1, specifying the readback mode.
ID[4:0]: Device ID
The ID[4:0] bits hold a device ID in the TDMCA mode.