Datasheet
ABSOLUTE MAXIMUM RATINGS
(1)
PCM1795
SLES248 – MAY 2009 ........................................................................................................................................................................................................
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
SPECIFIED
PACKAGE- PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT MEDIA,
PRODUCT LEAD DESIGNATOR RANGE MARKING NUMBER QUANTITY
PCM1795DB Tube
PCM1795 SSOP-28 DB – 25 ° C to +85 ° C PCM1795
PCM1795DBR Tape and Reel
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com .
Over operating free-air temperature range, unless otherwise noted.
VALUE UNIT
V
CC
1, V
CC
2L, V
CC
2R – 0.3 to +6.5 V
Supply voltage
V
DD
– 0.3 to +4 V
Supply voltage differences V
CC
1, V
CC
2L, V
CC
2R ± 0.1 V
Ground voltage differences AGND1, AGND2, AGND3L, AGND3R, DGND ± 0.1 V
LRCK, DATA, BCK, SCK, MSEL, RST, MS
(2)
, MDI, MC,
– 0.3 to +6.5 V
MDO
(2)
, ZEROL
(2)
, ZEROR
(2)
Digital input voltage
ZEROL
(3)
, ZEROR
(3)
, MDO
(3)
, MS
(3)
– 0.3 to (V
DD
+ 0.3) < 4 V
Analog input voltage – 0.3 to (V
CC
+ 0.3) < 6.5 V
Input current (any pins except supplies) ± 10 mA
Ambient temperature under bias – 40 to +125 ° C
Storage temperature – 55 to +150 ° C
Junction temperature +150 ° C
Package temperature (IR reflow, peak) +260 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input mode or I
2
C mode.
(3) Output mode except for I
2
C mode.
2 Submit Documentation Feedback Copyright © 2009, Texas Instruments Incorporated
Product Folder Link(s): PCM1795