Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
RECOMMENDED OPERATING CONDITIONS
ELECTRICAL CHARACTERISTICS
PCM1742
SBAS176A DECEMBER 2000 REVISED APRIL 2005
over operating free-air temperature range (unless otherwise noted)
Power supply voltage, V
DD
–0.3 V to 4 V
Power supply voltage, V
CC
–0.3 V to 6.5 V
Supply voltage difference, V
CC
, V
DD
V
CC
V
DD
< 3 V
Ground voltage differences ±0.1 V
Digital input voltage –0.3 V to 6.5 V
Input current (except power supply pins) ±10 mA
Ambient temperature under bias –40°C to 125°C
Storage temperature, T
stg
–55°C to 150°C
Junction temperature, T
J
150°C
Lead temperature (soldering) 260°C, 5 s
Package temperature (IR reflow, peak) 235°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
over operating free-air temperature range
MIN NOM MAX UNIT
Digital supply voltage, V
DD
3 3.3 3.6 V
Analog supply voltage, V
CC
4.5 5 5.5 V
Digital input logic family TTL
System clock 8.192 36.864 MHz
Digital input clock frequency
Sampling clock 32 192 kHz
Analog output load resistance 5 k
Analog output load capacitance 50 pF
Digital output load capacitance 20 pF
Operating free-air temperature, T
A
–25 85 °C
All specifications at T
A
= 25°C, V
CC
= 5 V, V
DD
= 3.3 V, f
S
= 44.1 kHz, system clock = 384 f
S
, and 24-bit data (unless
otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Resolution 24 Bits
DATA FORMAT
Audio data interface formats Standard, I
2
S, left-justified
Audio data bit length 16-, 18-, 20-, 24-bit selectable
Audio data format MSB-first, binary 2s complement
f
S
Sampling frequency 5 200 kHz
System clock frequency 128, 192, 256, 384, 512, 768 f
S
DIGITAL INPUT/OUTPUT
Logic family TTL compatible
Input Logic Level
V
IH
High-level input votlage 2 Vdc
V
IL
Low-level input voltage 0.8 Vdc
2