Datasheet

PCM1741
3
SBAS175
ANALOG FILTER PERFORMANCE
Frequency Response f = 20kHz –0.03 dB
f = 44kHz –0.20 dB
POWER SUPPLY REQUIREMENTS
(4)
Voltage Range, V
DD
+2.7 +3.3 +3.6 VDC
V
CC
+2.7 +3.0 +3.6 VDC
Supply Current, I
DD
f
S
= 44.1kHz 6.0 10 mA
f
S
= 96kHz 13.0 mA
I
CC
f
S
= 44.1kHz 7.0 11 mA
f
S
= 96kHz 7.0 mA
Power Dissipation f
S
= 44.1kHz 43 88 mW
f
S
= 96kHz 66 mW
TEMPERATURE RANGE
Operation Temperature –25 +85 °C
Thermal Resistance
θ
JA
SSOP-16 115 °C/W
NOTES: (1) Pins 1, 2, 3, 16 (SCK, BCK, LRCK, DATA). (2) Pins 13-15 (MD, MC, ML). (3) Pins 11, 12 (ZEROR, ZEROL). (4) Analog performance specifications
are tested with a Shibasoku #725 THD Meter with 400Hz HPF on, 30kHz LPF on, and an average mode with 20kHz bandwidth limiting. The load connected
to the analog output is 5kΩ or larger, via capacitive coupling.
SPECIFICATIONS (Cont.)
All specifications at T
A
= +25°C, V
CC
= 5.0V, V
DD
= 3.3V, system clock = 384f
S
(f
S
= 44.1kHz), and 24-bit data, unless otherwise noted.
PCM1741E
PARAMETER CONDITIONS MIN TYP MAX UNITS
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
Power Supply Voltage, V
DD
.............................................................. +4.0V
V
CC
.............................................................. +6.5V
Ground Voltage Differences.............................................................. ±0.1V
Digital Input Voltage ................................................–0.3V to (6.5V + 0.3V)
Input Current (except power supply) ............................................... ±10mA
Ambient Temperature Under Bias .................................. –40°C to +125°C
Storage Temperature ...................................................... –55°C to +150°C
Junction Temperature .................................................................... +150°C
Lead Temperature (soldering, 5s)................................................. +260°C
Package Temperature (IR reflow, 10s) .......................................... +235°C
ABSOLUTE MAXIMUM RATINGS
PACKAGE SPECIFIED
DRAWING TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT PACKAGE NUMBER RANGE MARKING NUMBER
(1)
MEDIA
PCM1741E SSOP-16 322 –25°C to +85°C PCM1741E PCM1741E Rails
"""""PCM1741E/2K Tape and Reel
NOTE: (1) Models with a slash (/) are available only in Tape and Reel in the quantities indicated (e.g., /2K indicates 2000 devices per reel). Ordering 2000 pieces
of “PCM1741E/2K” will yield a single 2000-piece Tape and Reel.
PACKAGE/ORDERING INFORMATION