Datasheet

www.ti.com
PCF8575C
REMOTE 16-BIT I
2
C AND SMBus LOW-POWER I/O EXPANDER
WITH INTERRUPT OUTPUT
SCPS123E – MARCH 2005 – REVISED OCTOBER 2007
TERMINAL FUNCTIONS
NO.
NAME FUNCTION
DB, DBQ, DGV,
RGE
DW, AND PW
1 22 INT Interrupt output. Connect to V
CC
through a pullup resistor.
2 23 A1 Address input 1. Connect directly to V
CC
or ground. Pullup resistors are not needed.
3 24 A2 Address input 2. Connect directly to V
CC
or ground. Pullup resistors are not needed.
4 1 P00 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
5 2 P01 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
6 3 P02 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
7 4 P03 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
8 5 P04 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
9 6 P05 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
10 7 P06 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
11 8 P07 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
12 9 GND Ground
13 10 P10 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
14 11 P11 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
15 12 P12 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
16 13 P13 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
17 14 P14 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
18 15 P15 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
19 16 P16 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
20 17 P17 P-port input/output. Open-drain design structure. Connect to V
CC
through a pullup resistor.
21 18 A0 Address input 0. Connect directly to V
CC
or ground. Pullup resistors are not needed.
22 19 SCL Serial clock line. Connect to V
CC
through a pullup resistor
23 20 SDA Serial data line. Connect to V
CC
through a pullup resistor.
24 21 V
CC
Supply voltage
Copyright © 2005 – 2007, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): PCF8575C