Datasheet
OPA836
OPA2836
SLOS712E –JANUARY 2011–REVISED SEPTEMBER 2013
www.ti.com
SPECIFICATIONS: V
S
= 5 V
Test conditions unless otherwise noted: V
S+
= +5 V, V
S–
= 0V, V
OUT
= 2 V
PP
, R
F
= 0 Ω, R
L
= 1 kΩ, G = 1 V/V, Input and Output
Referenced to mid-supply. T
A
= 25°C. Unless otherwise noted.
TEST
PARAMETER CONDITIONS MIN TYP MAX UNITS
LEVEL
(1)
AC PERFORMANCE
V
OUT
= 100 mV
PP
, G = 1 205
V
OUT
= 100 mV
PP
, G = 2 100
Small-signal bandwidth MHz C
V
OUT
= 100 mV
PP
, G = 5 28
V
OUT
= 100 mV
PP
, G = 10 11.8
Gain-bandwidth product V
OUT
= 100 mV
PP
, G = 10 118 MHz C
Large-signal bandwidth V
OUT
= 2 V
PP
, G = 2 87 MHz C
Bandwidth for 0.1dB flatness V
OUT
= 2 V
PP
, G = 2 29 MHz C
Slew rate, Rise/Fall 560/580 V/µs C
Rise/Fall time 3/3 ns C
Settling time to 1%, Rise/Fall 22/22 ns C
V
OUT
= 2V Step, G = 2
Settling time to 0.1%, Rise/Fall 30/30 ns C
Settling time to 0.01%, Rise/Fall 40/45 ns C
Overshoot/Undershoot 7.5/5 % C
f = 10 kHz –133 C
f = 100 kHz –120 dBc C
2
nd
Order Harmonic Distortion
f = 1 MHz –85 C
f = 10 kHz –140 C
f = 100 kHz –130 dBc C
3
rd
Order Harmonic Distortion
f = 1 MHz –105 C
–79 dBc C
2
nd
Order Intermodulation Distortion
f = 1 MHz, 200 kHz Tone Spacing,
V
OUT
Envelope = 2V
PP
–91 dBc C
3
rd
Order Intermodulation Distortion
0.00013 % C
f = 1kHz, V
OUT
= 1 V
RMS
, 22kHz
Signal to Noise Ratio, SNR
bandwidth
-117.6 dBc C
0.00003 % C
Total Harmonic Distortion, THD f = 1kHz, V
OUT
= 1 V
RMS
-130 dBc C
Input voltage noise f = 100 KHz 4.6 nV/√Hz C
Voltage Noise 1/f corner frequency 215 Hz C
Input current noise f > 1 MHz 0.75 pA/√Hz C
Current Noise 1/f corner frequency 31.7 kHz C
Overdrive recovery time, Over/Under Overdrive = 0.5 V 55/60 ns C
Closed-loop output impedance f = 100 kHz 0.02 Ω C
Channel to channel crosstalk (OPA2836) f = 10 kHz -120 dB C
(1) Test levels (all values set by characterization and simulation): (A) 100% tested at 25°C; over temperature limits by characterization and
simulation. (B) Not tested in production; limits set by characterization and simulation. (C) Typical value only for information.
6 Submit Documentation Feedback Copyright © 2011–2013, Texas Instruments Incorporated
Product Folder Links: OPA836 OPA2836