Datasheet

EVM Schematic, Layout, and Bill of Material (BOM) www.ti.com
2.2 Input and Output Connections
The OPA835DBV and OPA836DBV EVMs are equipped with SMA connectors for easy connection of
signal generators and analysis equipment. As shipped the EVMs are configure for non-inverting gain of 2
configuration and split supply with termination for connection to 50-Ω test equipment. For best results,
signals should be routed to and from the EVM with cables having 50-Ω characteristic impedance. See the
OPA835 data sheet (SLOS713) and the OPA836 data Sheet (SLOS712), and schematics and layouts for
details on how to reconfigure for other gain configurations.
3 EVM Schematic, Layout, and Bill of Material (BOM)
This section provides a complete schematic diagram, board layouts, and bill of materials for the
OPA835DBV and OPA836DBV EVMs.
2
OPA835DBV, OPA836DBV EVM SLOU314–March 2011
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated