Datasheet

"#$% &"#$
"#'% &"#'
SBOS282BDECEMBER 2003 − REVISED FEBRUARY 2005
www.ti.com
2
ABSOLUTE MAXIMUM RATINGS
(1)
Supply Voltage +13.2V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signal Input Terminals, Voltage
(2)
(V−) − 0.5V to (V+) + 0.5V. . . . . . . . . . .
Current
(2)
±10mA. . . . . . . . . . . . . . . . . . . . . . . . . . .
Output Short Circuit
(3)
Continuous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Temperature −40°C to +150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage Temperature −65°C to +150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Junction Temperature +150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead Temperature (soldering, 10s) +300°C. . . . . . . . . . . . . . . . . . . . . . . . . . .
ESD Rating (Human Body Model), OPA734 1000V. . . . . . . . . . . . . . . . . . . .
ESD Rating (Human Body Model), OPA735, OPA2734, OPA2735 2000V. . . .
(1)
Stresses above these ratings may cause permanent damage. Exposure
to absolute maximum conditions for extended periods may degrade
device reliability. These are stress ratings only, and functional operation of
the device at these or any other conditions beyond those specified is not
implied.
(2)
Input terminals are diode-clamped to the power-supply rails. Input signals
that can swing more than 0.5V beyond the supply rails should be current
limited to 10mA or less.
(3)
Short-circuit to ground, one amplifier per package.
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to observe
proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION
(1)
PRODUCT PACKAGE-LEAD
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT MEDIA,
QUANTITY
Shutdown Version
OPA734 SOT23-6 DBV −40°C to +85°C NSB OPA734AIDBVT Tape and Reel, 250
OPA734AIDBVR Tape and Reel, 3000
OPA734 SO-8 D −40°C to +85°C OPA734A OPA734AID Rails, 100
OPA734AIDR Tape and Reel, 2500
OPA2734 MSOP-10 DGS −40°C to +85°C BGO OPA2734AIDGST Tape and Reel, 250
OPA2734AIDGSR Tape and Reel, 2500
Non-Shutdown Version
OPA735 SOT23-5 DBV −40°C to +85°C NSC OPA735AIDBVT Tape and Reel, 250
OPA735AIDBVR Tape and Reel, 3000
OPA735 SO-8 D −40°C to +85°C OPA735A OPA735AID Rails, 100
OPA735AIDR Tape and Reel, 2500
OPA2735 SO-8 D −40°C to +85°C OPA2735A OPA2735AID Rails, 100
OPA2735AIDR Tape and Reel, 2500
OPA2735 MSOP-8 DGK −40°C to +85°C BGN OPA2735AIDGKT Tape and Reel, 250
OPA2735AIDGKR Tape and Reel, 2500
(1)
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com.