Datasheet
OPA615
SBOS299E –FEBRUARY 2004–REVISED SEPTEMBER 2009......................................................................................................................................
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Table 1. ORDERING INFORMATION
(1)
SPECIFIED
PACKAGE TEMPERATURE PACKAGE TRANSPORT MEDIA,
PRODUCT PACKAGE DESIGNATOR RANGE MARKING ORDERING NUMBER QUANTITY
OPA615ID Rails, 50
OPA615 SO-14 D –40°C to +85°C OPA615ID
OPA615IDR Tape and Reel, 2500
OPA615IDGST Tape and Reel, 250
OPA615 MSOP-10 DGS –40°C to +85°C BJT
OPA615IDGSR Tape and Reel, 2500
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
ABSOLUTE MAXIMUM RATINGS
(1)
Supply Voltage ±6.5V
Differential Input Voltage ±V
S
Common-Mode Input Voltage Range ±V
S
Hold Control Pin Voltage –V
S
to +V
S
Storage Temperature Range –65°C to +125°C
Junction Temperature (T
J
) +150°C
ESD Ratings:
Human Body Model (HBM)
(2)
1000V
Charge Device Model (CDM) 1000V
Machine Model (MM) 150V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
(2) Pin 2 for the SO-14 package and pin 1 for the MSOP-10 package > 500V HBM.
2 Submit Documentation Feedback Copyright © 2004–2009, Texas Instruments Incorporated
Product Folder Link(s): OPA615