Datasheet

OPA549
SBOS093E
2
www.ti.com
Output Current ................................................ See SOA Curve (Figure 6)
Supply Voltage, V+ to V– ................................................................... 60V
Input Voltage Range....................................... (V–) – 0.5V to (V+) + 0.5V
Input Shutdown Voltage ................................................... Ref – 0.5 to V+
Operating Temperature ..................................................–40°C to +125°C
Storage Temperature .....................................................–55°C to +125°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
ESD Capability (Human Body Model) ............................................. 2000V
NOTE: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may de-
grade device reliability.
CONNECTION DIAGRAM
–In
+In
Ref I
LIM
E/S
V+V
O
1357911
246810
V–
Tab connected to V–. Do not use to conduct current.
Connect both pins 1 and 2 to output.
Connect both pins 5 and 7 to V–.
Connect both pins 10 and 11 to V+.
ABSOLUTE MAXIMUM RATINGS
(1)
For the most current package and ordering information, see
the Package Option Addendum at the end of this datasheet
or see the TI website at www.ti.com.
PACKAGE/ORDERING INFORMATION
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.