Datasheet

""#
SBOS156B − MARCH 1987 − REVISED APRIL 2008
www.ti.com
2
ABSOLUTE MAXIMUM RATINGS
(1)
Power Supply ±50V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential Input Voltage ±80V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Voltage Range |±V
S
| − 3V. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage Temperature Range: M −65°C to +150°C. . . . . . . . . . . . . .
P, U, DDA −55°C to +125°C. . . . . . .
Operating Temperature Range −55°C to +125°C. . . . . . . . . . . . . . .
Output Short-Circuit to Ground (T
J
< +125°C) Continuous. . . . . .
Junction Temperature: M +175°C. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Junction Temperature: P, U, DDA +150°C. . . . . . . . . . . . . . . . . . . . .
(1)
Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not supported.
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to observe
proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
PRODUCT PACKAGE-LEAD PACKAGE DESIGNATOR PACKAGE MARKING
OPA445AP DIP-8 P OPA445AP
OPA445AU SO-8 Surface-Mount D OPA445AU
OPA445ADDA SO-8 PowerPAD DDA OPA445
OPA445BM TO-99 8-Pin LMC OPA445BM
(1)
For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI web site
at www.ti.com.