Datasheet

OPA3832
SBOS370A – DECEMBER 2006 – REVISED AUGUST 2008 ............................................................................................................................................ www.ti.com
ELECTRICAL CHARACTERISTICS: V
S
= +3.3V (continued)
Boldface limits are tested at +25 ° C.
At T
A
= +25 ° C, G = +2V/V, and R
L
= 150 Ω to V
CM
= 0.75V, unless otherwise noted.
OPA3832ID, IPW
0 ° C to MIN/ TEST
PARAMETER CONDITIONS +25 ° C +25 ° C
(1)
+70 ° C
(2)
UNITS MAX LEVEL
(3)
DISABLE (Disabled LOW)
Power-Down Supply Current (+V
S
) V
DIS
= 0, All Channels 0.4 0.8 0.85 mA max A
DIsable Time V
IN
= 1V
DC
40 µ s typ C
Enable Time V
IN
= 1V
DC
20 ns typ C
Off Isolation G = +2V/V, 5MHz – 75 dB typ C
Output Capacitance in Disable pF typ C
Turn-On Glitch G = +2V/V, R
L
= 150 Ω , V
IN
= 0V 2 mV typ C
Turn-Off Glitch G = +2V/V, R
L
= 150 Ω , V
IN
= 0V 6 mV typ C
Enable Voltage 2.8 2.8 V min A
Disable Voltage 1.3 1.3 V max A
Control Pin Input Bias Current ( DIS) V
DIS
= 0V, Each Channel 73 130 140 µ A max A
POWER SUPPLY
Minimum Operating Voltage +2.8 V typ C
Maximum Operating Voltage — +11 +11 V max A
Maximum Quiescent Current All Channels, V
S
= +3.3V 11.4 12.2 14.5 mA max A
Minimum Quiescent Current All Channels, V
S
= +3.3V 11.4 10.2 9.5 mA min A
Power-Supply Rejection Ratio (PSRR) Input-Referred 60 dB typ C
THERMAL CHARACTERISTICS
Specification: ID, IPW – 40 to +85 ° C typ C
Thermal Resistance
D SO-14 85 ° C/W typ C
PW TSSOP-14 100 ° C/W typ C
8 Submit Documentation Feedback Copyright © 2006 – 2008, Texas Instruments Incorporated
Product Folder Link(s): OPA3832