Datasheet

1
2
3
5
4
V+
+In
V-
-In
Out
OPA378
SC70-5
(TOPVIEW)
1
2
3
5
4
V+
-In
Out
V-
+In
OPA378
SOT23-5
(TOPVIEW)
1
2
3
4
8
7
6
5
V+
OutB
-InB
+InB
OutA
-InA
+InA
V-
A
B
OPA2378
SOT23-8
(TOPVIEW)
OPA378
OPA2378
SBOS417D –JANUARY 2008–REVISED OCTOBER 2009 www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE INFORMATION
(1)
PRODUCT PACKAGE-LEAD PACKAGE DESIGNATOR PACKAGE MARKING
OPA378 SOT23-5 DBV OAZI
OPA378 SC70-5 DCK BTS
OPA2378 SOT23-8 DCN OCAI
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS
(1)
Over operating free-air temperature range (unless otherwise noted).
OPA378, OPA2378 UNIT
Supply Voltage, V
S
= (V+) – (V–) +7 V
Voltage
(2)
(V–) – 0.3 ≤ V
IN
≤ (V+) + 0.3 V
Signal Input Terminals
Current
(2)
±10 mA
Output Short-Circuit
(3)
Continuous
Operating Temperature, T
A
–55 to +150 °C
Storage Temperature, T
A
–65 to +150 °C
Junction Temperature, T
J
+150 °C
Human Body Model (HBM) 4000 V
ESD Ratings Charged Device Model (CDM) 1000 V
Machine Model (MM) 200 V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not supported.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.3V beyond the supply rails should
be current limited to 10mA or less.
(3) Short-circuit to ground, one amplifier per package.
PIN CONFIGURATIONS
2 Submit Documentation Feedback Copyright © 2008–2009, Texas Instruments Incorporated
Product Folder Link(s): OPA378 OPA2378