Datasheet

OPA3690
SBOS237G –MARCH 2002–REVISED MARCH 2010 www.ti.com
ELECTRICAL CHARACTERISTICS: V
S
= +5V (continued)
Boldface limits are tested at +25°C.
At R
F
= 402Ω for G = +2 (see Figure 37 for ac performance only), R
F
= 25Ω for G = +1, and R
L
= 100Ω to V
S
/2, unless
otherwise noted.
OPA3690ID, IDBQ
MIN/MAX OVER
TYP TEMPERATURE
0°C to -40°C to MIN/ TEST
PARAMETER TEST CONDITIONS +25°C +25°C
(2)
+70°C
(3)
+85°C
(3)
UNIT MAX LEVELS
(1)
OUTPUT
Most Positive Output Voltage No Load 4 3.8 3.6 3.5 V min A
R
L
= 100Ω to 2.5V 3.9 3.7 3.5 3.4 V min A
Least Positive Output Voltage No Load 1 1.2 1.4 1.5 V min A
R
L
= 100Ω to 2.5V 1.1 1.3 1.5 1.7 V min A
Current Output, Sourcing +160 +120 +100 +80 mA min A
Current Output, Sinking –160 –120 –100 –80 mA min A
Short-Circuit Current V
O
= V
S
/2 ±250 mA typ C
Closed-Loop Output Impedance G = +2, f = 100kHz 0.04 Ω typ C
DISABLE Disabled LOW
Power-Down Supply Current (+V
S
) V
DIS
= 0V, All Channels –300 –600 –720 –780 mA max A
Off Isolation G = +2, 5MHz 65 dB typ C
Output Capacitance in Disable 4 pF typ C
Turn-On Glitch G = +2, R
L
= 150Ω, V
IN
= V
S
/2 ±50 mV typ C
Turn-Off Glitch G = +2, R
L
= 150Ω, V
IN
= V
S
/2 ±20 mV typ C
Enable Voltage 3.3 3.5 3.6 3.7 V min A
Disable Voltage 1.8 1.7 1.6 1.5 V max A
Control Pin Input BIas Current V
DIS
= 0V, Each Channel 75 130 150 160 mA typ C
POWER SUPPLY
Specified Single-Supply Operating Voltage 5 V typ C
Maximum Single-Supply Operating Voltage 12 12 12 V max A
Maximum Quiescent Current (3 Channels) V
S
= +5V 14.7 16.32 17.16 18.06 mA max A
Minimum Quiescent Current (3 Channels) V
S
= +5V 14.7 13.44 12.00 11.58 mA min A
Power-Supply Rejection Ratio (+PSRR) Input-Referred 72 dB typ C
THERMAL CHARACTERISTICS
Specification: D, DBQ –40 to +85 °C typ C
Thermal Resistance, q
JA
xx x D xxxx x SO-16 100 °C/W typ C
xx x DBQ xxx SSOP-16 100 °C/W typ C
6 Submit Documentation Feedback Copyright © 2002–2010, Texas Instruments Incorporated
Product Folder Link(s): OPA3690