Datasheet

"#$% #"#$
"#&% #"#&
SBOS278B − SEPTEMBER 2003 − REVISED JANUARY 2004
www.ti.com
2
ORDERING INFORMATION
PRODUCT PACKAGE-LEAD
PACKAGE
DESIGNATOR
(1)
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
Non-Shutdown
OPA725 SOT23-5 DBV −40°C to +125°C OALI OPA725AIDBVT Tape and Reel, 250
″ ″ ″ ″ ″ OPA725AIDBVR Tape and Reel, 3000
OPA725 SO-8 D −40°C to +125°C OPA725A OPA725AID Rails, 100
″ ″ ″ ″ ″ OPA725AIDR Tape and Reel, 2500
OPA2725 SO-8 D −40°C to +125°C OPA2725A OPA2725AID Rails, 100
″ ″ ″ ″ ″ OPA2725AIDR Tape and Reel, 2500
OPA2725 MSOP-8 DGK −40°C to +125°C BGM OPA2725AIDGKT Tape and Reel, 250
″ ″ ″ ″ ″ OPA2725AIDGKR Tape and Reel, 2500
Shutdown
OPA726 SO-8 D −40°C to +125°C OPA726A OPA726AID Rails, 100
″ ″ ″ ″ ″ OPA726AIDR Tape and Reel, 2500
OPA726 MSOP-8 DGK −40°C to +125°C BHC OPA726AIDGKT Tape and Reel, 250
″ ″ ″ ″ ″ OPA726AIDGKR Tape and Reel, 2500
OPA2726 MSOP-10 DGS −40°C to +125°C BHB OPA2726AIDGST Tape and Reel, 250
″ ″ ″ ″ ″ OPA2726AIDGSR Tape and Reel, 2500
(1)
For the most current package and ordering information, see the Package Option Addendum located at the end of this datasheet.
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to observe
proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
ABSOLUTE MAXIMUM RATINGS
(1)
Supply Voltage +13.2V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signal Input Terminals, Voltage
(2)
−0.5V to (V+) + 0.5V. . . . . . . . .
Current
(2)
±10mA. . . . . . . . . . . . . . . . . . .
Output Short Circuit
(3)
Continuous. . . . . . . . . . . . . . . . . . . . . . . . .
Operating Temperature −55°C to +125°C. . . . . . . . . . . . . . . . . . . . .
Storage Termperature −55°C to +150°C. . . . . . . . . . . . . . . . . . . . . .
Junction Temperature +150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead Temperature (soldering, 10s) +300°C. . . . . . . . . . . . . . . . . . . .
ESD Rating (Human Body Model) 1000 V. . . . . . . . . . . . . . . . . . . .
(1)
Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not supported.
(2)
Input terminals are diode-clamped to the power-supply rails.
Input signals that can swing more than 0.5V beyond the supply
rails should be current limited to 10mA or less.
(3)
Short-circuit to ground, one amplifier per package.