Datasheet

OPA2694
SBOS320D − SEPTEMBER 2004 − REVISED APRIL 2013
www.ti.com
4
ELECTRICAL CHARACTERISTICS: V
S
= ±5V (continued)
Boldface limits are tested at +25°C. At R
F
= 402Ω, R
L
= 100Ω, and G = +2V/V, unless otherwise noted.
PARAMETER
TEST
LEVEL
(3)
MIN/
MAX
UNITS
OPA2694ID
CONDITIONS
PARAMETER
TEST
LEVEL
(3)
MIN/
MAX
UNITS
MIN/MAX OVER TEMPERATURETYP
CONDITIONS
PARAMETER
TEST
LEVEL
(3)
MIN/
MAX
UNITS
−40°C to
+85°C
(2)
0°C to
70°C
(2)
+25°C
(1)
+25°C
CONDITIONS
POWER SUPPLY
Specified Operating Voltage ±5 V typ C
Maximum Operating Voltage Range — ±6.3 ±6.3 ±6.3 V max A
Minimum Operating Voltage Range — ±3.5 ±3.5 ±3.5 mA max B
Maximum Quiescent Current V
S
= ±5V, Both Channels 11.6 12.1 12.5 12.7 mA max A
Minimum Quiescent Current V
S
= ±5V, Both Channels 11.6 11.1 10.5 9.9 mA min A
Power-Supply Rejection Ratio (PSRR) Input-Referred 58 53 51 49 dB min A
THERMAL CHARACTERISTICS
Specification: ID −40 to +85 °C typ C
Thermal Resistance q
JA
Junction-to-Ambient — — — —
D SO-8 125 °C/W typ C
(1)
Junction temperature = ambient for +25°C specifications.
(2)
Junction temperature = ambient at low temperature limits; junction temperature = ambient +15°C at high temperature limit for over temperature specifications.
(3)
Test levels: (A) 100% tested at +25°C. Over temperature limits by characterization and simulation. (B) Limits set by characterization and simulation. (C) Typical
value only for information.
(4)
Current is considered positive out of node. V
CM
is the input common-mode voltage.
(5)
Tested < 3dB below minimum specified CMRR at ±CMIR limits.