Datasheet
ABSOLUTE MAXIMUM RATINGS
(1)
OPA379
OPA2379
OPA4379
SBOS347D – NOVEMBER 2005 – REVISED MAY 2008 ...................................................................................................................................................
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Over operating free-air temperature range (unless otherwise noted).
OPA379, OPA2379, OPA4379 UNIT
Supply Voltage V
S
= (V+) – (V – ) +7 V
Signal Input Terminals, Voltage
(2)
(V – ) – 0.5 to (V+) + 0.5 V
Signal Input Terminals, Current
(2)
± 10 mA
Output Short-Circuit
(3)
Continuous
Operating Temperature T
A
– 40 to +125 ° C
Storage Temperature T
A
– 65 to +150 ° C
Junction Temperature T
J
+150 ° C
Human Body Model (HBM) 2000 V
ESD Rating
Charged Device Model (CDM) 1000 V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not supported.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should
be current-limited to 10mA or less.
(3) Short-circuit to ground, one amplifier per package.
PACKAGE/ORDERING INFORMATION
(1)
PRODUCT PACKAGE-LEAD PACKAGE DESIGNATOR PACKAGE MARKING
SC70 − 5 DCK AYR
OPA379 SOT23 − 5 DBV B53
SO − 8 D OPA379A
SOT23 − 8 DCN B61
OPA2379
SO − 8 D OPA2379A
OPA4379 TSSOP − 14 PW OPA4379A
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com .
2 Submit Documentation Feedback Copyright © 2005 – 2008, Texas Instruments Incorporated
Product Folder Link(s): OPA379 OPA2379 OPA4379