Datasheet

OPA343, 2343, 4343
3
SBOS090A
PACKAGE/ORDERING INFORMATION
Supply Voltage ................................................................................... 7.5V
Signal Input Terminals, Voltage
(2)
.....................(V–) –0.5V to (V+) +0.5V
Current
(2)
.................................................... 10mA
Output Short-Circuit
(3)
.............................................................. Continuous
Operating Temperature ..................................................–55°C to +125°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may de-
grade device reliability. (2) Input terminals are diode-clamped to the power
supply rails. Input signals that can swing more than 0.5V beyond the supply
rails should be current-limited to 10mA or less. (3) Short-circuit to ground,
one amplifier per package.
ABSOLUTE MAXIMUM RATINGS
(1)
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility
for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or
licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support
devices and/or systems.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
PACKAGE SPECIFIED
DRAWING TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT PACKAGE NUMBER RANGE MARKING NUMBER
(1)
MEDIA
Single
OPA343NA 5-Lead SOT-23-5 331 –40°C to +85°C B43 OPA343NA/250 Tape and Reel
"""""OPA343NA/3K Tape and Reel
OPA343UA SO-8 Surface-Mount 182 –40°C to +85°C OPA343UA OPA343UA Rails
"""""OPA343UA/2K5 Tape and Reel
Dual
OPA2343EA MSOP-8 Surface-Mount 337 –40°C to +85°C C43 OPA2343EA/250 Tape and Reel
"""""OPA2343EA/2K5 Tape and Reel
OPA2343UA SO-8 Surface-Mount 182 –40°C to +85°C OPA2343UA OPA2343UA Rails
"
""""OPA2343UA/2K5 Tape and Reel
Quad
OPA4343EA SSOP-16 Surface-Mount 322 –40°C to +85°C OPA4343EA OPA4343EA/250 Tape and Reel
"
""""OPA4343EA/2K5 Tape and Reel
OPA4343UA SO-14 Surfac-Mount 235 –40°C to +85°C OPA4343UA OPA4343UA Rails
"
""""OPA4343UA/2K5 Tape and Reel
OPA4343NA TSSOP-14 Surface-Mount 357 –40°C to +85°C OPA4343NA OPA4343NA/250 Tape and Reel
" " " " " OPA4343NA/2K5 Tape and Reel
NOTE: (1) Models with a slash (/) are available only in Tape and Reel in the quantities indicated (e.g., /2K5 indicates 2500 devices per reel). Ordering 2500 pieces
of “OPA2343EA/2K5” will get a single 2500 piece Tape and Reel.