Datasheet

5
OPA244, 2244, 4244
®
PACKAGE SPECIFIED
DRAWING TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT PACKAGE NUMBER RANGE MARKING NUMBER
(1)
MEDIA
Single
OPA244NA SOT-23-5 Surface-Mount 331 –40°C to +85°C A44 OPA244NA/250 Tape and Reel
"""""OPA244NA/3K Tape and Reel
OPA244PA 8-Pin DIP 006 –40°C to +85°C OPA244PA OPA244PA Rails
OPA244UA SO-8 Surface-Mount 182 –40°C to +85°C OPA244UA OPA244UA Rails
"""""OPA244UA/2K5 Tape and Reel
Dual
OPA2244EA MSOP-8 Surface-Mount 337 –40°C to +85°C A44 OPA2244EA/250 Tape and Reel
"""""OPA2244EA/2K5 Tape and Reel
OPA2244PA 8-Pin DIP 006 –40°C to +85°C OPA2244PA OPA2244PA Rails
OPA2244UA SO-8 Surface-Mount 182 –40°C to +85°C OPA2244UA OPA2244UA Rails
"""""OPA2244UA/2K5 Tape and Reel
Quad
OPA4244EA TSSOP-14 Surface-Mount 357 –40°C to +85°C OPA4244EA OPA4244EA/250 Tape and Reel
"""""OPA4244EA/2K5 Tape and Reel
NOTE: (1) Products followed by a slash (/) are only available in Tape and Reel in the quantities indicated (e.g., /250 indicates 250 devices per reel). Ordering 3000
pieces of “OPA244NA/3K” will get a single 3000 piece Tape and Reel.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
Supply Voltage, V+ to V– .................................................................... 36V
Input Voltage Range
(2)
................................... (V–) – 0.3V to (V+) + 0.3V
Input Current
(2)
................................................................................. 10mA
Output Short-Circuit
(3)
.............................................................. Continuous
Operating Temperature ..................................................–55°C to +125°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
ESD Capability ................................................................................ 2000V
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may de-
grade device reliability. (2) Inputs are diode-clamped to the supply rails and
should be current-limited to 10mA or less if input voltages can exceed rails
by more than 0.3V. (3) Short-circuit to ground, one amplifier per package.
ABSOLUTE MAXIMUM RATINGS
(1)
PACKAGE/ORDERING INFORMATION