Datasheet

4
®
OPA241, 2241, 4241
OPA251, 2251, 4251
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
Supply Voltage, V+ to V– .................................................................... 36V
Input Voltage
(2)
..................................................(V–) –0.5V to (V+) +0.5V
Output Short Circuit
to Ground
(3)
............................................ Continuous
Operating Temperature ..................................................–55°C to +125°C
Storage Temperature .....................................................–55°C to +125°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
NOTES: (1) Stresses above these ratings may cause permanent damage.
(2) Input terminals are diode-clamped to the power supply rails. Input signals
that can swing more that 0.5V beyond the supply rails should be current-
limited to 5mA or less. (3) One amplifier per package.
ABSOLUTE MAXIMUM RATINGS
(1)
PACKAGE/ORDERING INFORMATION
OPERATING PACKAGE SPECIFICATION
SPECIFIED VOLTAGE DRAWING TEMPERATURE
PRODUCT VOLTAGE RANGE PACKAGE NUMBER
(1)
RANGE
OPA241 SERIES
Single
OPA241PA 2.7V to 5V 2.7V to 36V 8-Pin DIP 006 –40°C to +85°C
OPA241UA 2.7V to 5V 2.7V to 36V SO-8 Surface Mount 182 –40°C to +85°C
Dual
OPA2241PA 2.7V to 5V 2.7V to 36V 8-Pin DIP 006 –40°C to +85°C
OPA2241UA 2.7V to 5V 2.7V to 36V SO-8 Surface Mount 182 –40°C to +85°C
Quad
OPA4241PA 2.7V to 5V 2.7V to 36V 14-Pin DIP 010 –40°C to +85°C
OPA4241UA 2.7V to 5V 2.7V to 36V SO-14 Surface Mount 235 –40°C to +85°C
OPA251 SERIES
Single
OPA251PA ±15V 2.7V to 36V 8-Pin DIP 006 –40°C to +85°C
OPA251UA ±15V 2.7V to 36V SO-8 Surface Mount 182 –40°C to +85°C
Dual
OPA2251PA ±15V 2.7V to 36V 8-Pin DIP 006 –40°C to +85°C
OPA2251UA ±15V 2.7V to 36V SO-8 Surface Mount 182 –40°C to +85°C
Quad
OPA4251PA ±15V 2.7V to 36V 14-Pin DIP 010 –40°C to +85°C
OPA4251UA ±15V 2.7V to 36V SO-14 Surface Mount 235 –40°C to +85°C
NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book.