Datasheet
ABSOLUTE MAXIMUM RATINGS
(1)
OPA211
OPA2211
SBOS377G – OCTOBER 2006 – REVISED MAY 2009 ......................................................................................................................................................
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Over operating free-air temperature range (unless otherwise noted).
VALUE UNIT
Supply Voltage V
S
= (V+) – (V – ) 40 V
Input Voltage (V – ) – 0.5 to (V+) + 0.5 V
Input Current (Any pin except power-supply pins) ± 10 mA
Output Short-Circuit
(2)
Continuous
Operating Temperature (T
A
) – 55 to +150 ° C
Storage Temperature (T
A
) – 65 to +150 ° C
Junction Temperature (T
J
) 200 ° C
Human Body Model (HBM) 3000 V
ESD Ratings
Charged Device Model (CDM) 1000 V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not supported.
(2) Short-circuit to V
S
/2 (ground in symmetrical dual supply setups), one amplifier per package.
PACKAGE/ORDERING INFORMATION
(1)
PACKAGE PACKAGE
PRODUCT PACKAGE-LEAD SINGLE SHUTDOWN DUAL DESIGNATOR MARKING
Standard Grade
DFN-8 (3mm × 3mm) ü ü DRG OBDQ
MSOP-8 ü ü DGK OBCQ
OPA211AI
A TI OPA
SO-8 ü D
211
DFN-8 (3mm × 3mm) ü DRG OBHQ
OPA2211AI
A TI OPA
SO-8 PowerPAD ü DDA
2211
High Grade
DFN-8 (3mm × 3mm) ü ü DRG OBDQ
MSOP-8 ü ü DGK OBCQ
OPA211I
TI OPA
SO-8 ü D
211
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com .
2 Submit Documentation Feedback Copyright © 2006 – 2009, Texas Instruments Incorporated
Product Folder Link(s): OPA211 OPA2211