Datasheet

Philips Semiconductors Linear Products Product specification
NE5533/5533A/
NE/SA/SE5534/5534A
Dual and single low noise op amp
August 31, 1994
115
ABSOLUTE MAXIMUM RATINGS
SYMBOL PARAMETER RATING UNIT
V
S
Supply voltage ±22 V
V
IN
Input voltage ±V supply V
V
DIFF
Differential input voltage
1
±0.5 V
T
A
Operating temperature range
SE -55 to +125 °C
SA -40 to +85 °C
NE 0 to +70 °C
T
STG
Storage temperature range -65 to +150 °C
T
J
Junction temperature 150 °C
P
D
Power dissipation at 25°C
2
16D Pkg 1350 mW
16N Pkg 1500 mW
8D Pkg 750 mW
8FE Pkg 800 mW
8N Pkg 1150 mW
Output short-circuit duration
3
Indefinite
T
SOLD
Lead soldering temperature (10sec max) 300 °C
NOTES:
1. Diodes protect the inputs against over voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential
input voltage exceeds 0.6V. Maximum current should be limited to ±10mA.
2. For operation at elevated temperature, derate packages based on the following junction-to-ambient thermal resistance:
8-pin ceramic DIP 150°C/W
8-pin plastic DIP 105°C/W
8-pin plastic SO 160°C/W
16-pin plastic DIP 80°C/W
16-pin plastic SO 90°C/W
3. Output may be shorted to ground at V
S
=±15V, T
A
=25°C. Temperature and/or supply voltages must be limited to ensure dissipation rating is
not exceeded.