Datasheet

Input

Sense

ImP

ImN

VmN

VmP

15vP SupP15vN SupNGND

Multi-Cal-Master-PCA

HP34401

DMM

Ammeter

plugs are

not connected

Linear

Power Supply

Linear

Power Supply

+15V

GND

-15V

POS

NEG

Common ground between 15V and 5V supply

www.ti.com

Starter System Setup

Figure 16 shows how to connect the Multi-Cal-Power cable to power supplies and to the DMM. This

connection is for voltage output modules (that is. three-wire and four-wire connections). See Table 3 for

information on how to set the jumpers on the Multi-Cal-Test PCA for current loop configuration.

Figure 16. Connect Multi-Cal-Power-Cable to Power Supplies (Voltage Output)

SBOU087A– August 2010– Revised April 2011 Multi-Cal-System Evaluation Module

Submit Documentation Feedback