Datasheet

Starter System Setup www.ti.com
Figure 11 shows the jumper setup on Multi-Cal-Interface PCA. The Multi-Cal-Interface PCA has eight
jumpers that allow you to choose between current mode sensor modules (for example, 4 mA to 20 mA)
and voltage mode sensor modules (such as 0-V to 5-V output). Place all jumpers in the V position for
voltage mode; alternatively, place all jumpers in the I position for current mode.
Figure 11. Jumpers on Multi-Cal-Interface PCA Card
12
Multi-Cal-System Evaluation Module SBOU087A– August 2010– Revised April 2011
Submit Documentation Feedback
Copyright © 2010–2011, Texas Instruments Incorporated