Datasheet

MSP430G2x32
MSP430G2x02
SLAS723H DECEMBER 2010REVISED MAY 2013
www.ti.com
Calibrated DCO Frequencies – Tolerance
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS T
A
V
CC
MIN TYP MAX UNIT
BCSCTL1= CALBC1_1MHZ,
1-MHz tolerance over
DCOCTL = CALDCO_1MHZ, 0°C to 85°C 3 V -3 ±0.5 +3 %
temperature
(1)
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_1MHZ,
1-MHz tolerance over V
CC
DCOCTL = CALDCO_1MHZ, 30°C 1.8 V to 3.6 V -3 ±2 +3 %
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_1MHZ,
1-MHz tolerance overall DCOCTL = CALDCO_1MHZ, -40°C to 85°C 1.8 V to 3.6 V -6 ±3 +6 %
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_8MHZ,
8-MHz tolerance over
DCOCTL = CALDCO_8MHZ, 0°C to 85°C 3 V -3 ±0.5 +3 %
temperature
(1)
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_8MHZ,
8-MHz tolerance over V
CC
DCOCTL = CALDCO_8MHZ, 30°C 2.2 V to 3.6 V -3 ±2 +3 %
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_8MHZ,
8-MHz tolerance overall DCOCTL = CALDCO_8MHZ, -40°C to 85°C 2.2 V to 3.6 V -6 ±3 +6 %
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_12MHZ,
12-MHz tolerance over
DCOCTL = CALDCO_12MHZ, 0°C to 85°C 3 V -3 ±0.5 +3 %
temperature
(1)
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_12MHZ,
12-MHz tolerance over V
CC
DCOCTL = CALDCO_12MHZ, 30°C 2.7 V to 3.6 V -3 ±2 +3 %
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_12MHZ,
12-MHz tolerance overall DCOCTL = CALDCO_12MHZ, -40°C to 85°C 2.7 V to 3.6 V -6 ±3 +6 %
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_16MHZ,
16-MHz tolerance over
DCOCTL = CALDCO_16MHZ, 0°C to 85°C 3.3 V -3 ±0.5 +3 %
temperature
(1)
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_16MHZ,
16-MHz tolerance over V
CC
DCOCTL = CALDCO_16MHZ, 30°C 3.3 V to 3.6 V -3 ±2 +3 %
calibrated at 30°C and 3 V
BCSCTL1= CALBC1_16MHZ,
16-MHz tolerance overall DCOCTL = CALDCO_16MHZ, -40°C to 85°C 3.3 V to 3.6 V -6 ±3 +6 %
calibrated at 30°C and 3 V
(1) This is the frequency change from the measured frequency at 30°C over temperature.
26 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated