Datasheet

MSP430G2x52

MSP430G2x12

www.ti.com

SLAS722G –DECEMBER 2010–REVISED MAY 2013

REVISION HISTORY

REVISION DESCRIPTION

SLAS722 Initial release

Page 1, Changed "Internal Frequencies up to 16 MHz With One Calibrated Frequency" to "Internal Frequencies up to 16

SLAS722A

MHz With Four Calibrated Frequencies"

Added note concerning pulldown resistor to PW14 and RSA16 pinout drawings.

Added "N20, PW20" to Input Pin Number and Output Pin Number columns in Table 11.

SLAS722B

Corrected pin numbers for P1.0 to P1.3 for PW14 package in Table 2.

Corrected N20, PW20 Output Pin Number for TA0.0 in Table 11. (June 2011)

Changed Storage temperature range limit in Absolute Maximum Ratings.

SLAS722C

Corrected SDA pin name in Table 17.

Changed TAG_ADC10_1 value to 0x10 in Table 9.

SLAS722D

Changed T

stg

, Programmed device, to -55°C to 150°C in Absolute Maximum Ratings.

SLAS722E Changed all port schematics (added buffer after PxOUT.y mux) in Pin Schematics

Table 2, Corrected typo on VEREF- (P1.3) signal name.

Recommended Operating Conditions, Added test conditions for typical values.

SLAS722F

Pin-Oscillator Frequency – Ports Px, Corrected resistor value in note (1).

POR, BOR, Added note (2).

SLAS722G Throughout, Changed all variations of touch sense

(1)

to capacitive touch.

(1) TouchSense is a trademark of Immersion Corporation.