Datasheet

MSP430G22x0
www.ti.com SLAS753E –JANUARY 2012–REVISED FEBRUARY 2013
Comparator_A+ (MSP430G2210 Only)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS V
CC
MIN TYP MAX UNIT
I
(DD)
(1)
CAON = 1, CARSEL = 0, CAREF = 0 3 V 45 µA
I
(Refladder/
CAON = 1, CARSEL = 0, CAREF = 1/2/3,
3 V 45 µA
RefDiode)
No load at CA0 and CA1
V
(IC)
Common–mode input voltage CAON = 1 3 V 0 V
CC
-1 V
PCA0 = 1, CARSEL = 1, CAREF = 1,
V
(Ref025)
(Voltage at 0.25 V
CC
node) / V
CC
3 V 0.24
No load at CA0 and CA1
PCA0 = 1, CARSEL = 1, CAREF = 2,
V
(Ref050)
(Voltage at 0.5 V
CC
node) / V
CC
3 V 0.48
No load at CA0 and CA1
PCA0 = 1, CARSEL = 1, CAREF = 3,
V
(RefVT)
See Figure 18 and Figure 19 3 V 490 mV
No load at CA0 and CA1, TA = 85°C
V
(offset)
Offset voltage
(2)
3 V ±10 mV
V
hys
Input hysteresis CAON = 1 3 V 0.7 mV
T
A
= 25°C, Overdrive 10 mV,
120 ns
Without filter: CAF = 0
Response time
t
(response)
3 V
(low-to-high and high-to-low)
T
A
= 25°C, Overdrive 10 mV,
1.5 µs
With filter: CAF = 1
(1) The leakage current for the Comparator_A+ terminals is identical to I
lkg(Px.y)
specification.
(2) The input offset voltage can be cancelled by using the CAEX bit to invert the Comparator_A+ inputs on successive measurements. The
two successive measurements are then summed together.
Copyright © 2012–2013, Texas Instruments Incorporated Submit Documentation Feedback 25