Datasheet

MSP430FW429, MSP430FW428

MSP430FW427, MSP430FW425, MSP430FW423

SLAS383E –OCTOBER 2003–REVISED DECEMBER 2013

www.ti.com

REVISION HISTORY

REVISION COMMENTS

SLAS383 Initial release

Clarified descriptions for AV

and AV

in Terminal Functions table (page 4)

Clarified notes in Interrupt Vector Addresses (page 8)

Removed V

and V

entries from Recommended Operating Conditions (page 18)

SLAS383A Changed note 2 on Recommended Operating Conditions (page 18)

Added to Wakeup LPM3 table (page 22)

Removed TAx references in Comparator_A table (page 23)

Clarified notes on Flash Memory table (page 36)

Updated functional block diagram (page 3)

Clarified test conditions in recommended operating conditions table (page 18)

Clarified test conditions in electrical characteristics table (page 19)

SLAS383B

Added I

lkg(Px.x)

for all ports in leakage current table (page 20)

Clarified test conditions in DCO table (page 29)

Changed t

CPT

maximum value from 4 ms to 10 ms in Flash Memory table (page 36)

SLAS383C Updated max values for V

and V

hys

in Scan IF, Comparator table (page 35)

SLAS383D Added information about FW428 and FW429

Recommended Operating Conditions, Added test conditions for typical values.

Port P2, P2.0 to P2.7, Input/Output With Schmitt Trigger, At the top left of the image, changed LCDM.5, LCDM.6, and

LCDM.7 to LCDPx.0, LCDPx.1, and LCDPx.2, respectively.

Port P3, P3.0 to P3.7, Input/Output With Schmitt Trigger, At the top left of the image, changed LCDM.5, LCDM.6, and

SLAS383E

LCDM.7 to LCDPx.0, LCDPx.1, and LCDPx.2, respectively.

Port P4, P4.0 to P4.7, Input/Output With Schmitt Trigger, At the top left of the image, changed LCDM.5, LCDM.6, and

LCDM.7 to LCDPx.0, LCDPx.1, and LCDPx.2, respectively.

Port P5, P5.0, P5.1, Input/Output With Schmitt Trigger, At the top left of the image, changed LCDM.5, LCDM.6, and

LCDM.7 to LCDPx.0, LCDPx.1, and LCDPx.2, respectively.

Product Folder Links: MSP430FW429 MSP430FW428 MSP430FW427 MSP430FW425 MSP430FW423