Datasheet

MSP430xG461x
MIXED SIGNAL MICROCONTROLLER
SLAS508I − APRIL 2006 − REVISED MARCH 2011
45
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted) (continued)
USCI (UART mode)
PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT
f
USCI
USCI input clock frequency
Internal: SMCLK, ACLK
External: UCLK
Duty Cycle = 50% ± 10%
f
SYSTEM
MHz
f
BITCLK
BITCLK clock frequency
(equals Baudrate in MBaud)
2.2V /3 V 1 MHz
t
UART receive de
g
litch time
2.2 V 50 150 600
ns
t
τ
UART
receive
deglitch
time
(see Note 1)
3 V 50 100 600
ns
NOTE 1: Pulses on the UART receive input (UCxRX) shorter than the UART receive deglitch time are suppressed. To ensure that pulses are
correctly recognized their width should exceed the maximum specification of the deglitch time.
USCI (SPI master mode) (see Figure 18 and Figure 19)
PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT
f
USCI
USCI input clock frequency
SMCLK, ACLK
Duty Cycle = 50% ± 10%
f
SYSTEM
MHz
t
SOMI input data setup time
2.2 V 110
ns
t
SU,MI
SOMI input data setup time
3 V 75
ns
t
SOMI input data hold time
2.2 V 0
ns
t
HD,MI
SOMI input data hold time
3 V 0
ns
t
SIMO output data valid time
UCLK ed
g
e to SIMO valid;
2.2 V 30
ns
t
VALID,MO
SIMO output data valid time
UCLK
edge
to
SIMO
valid;
C
L
= 20 pF
3 V 20
ns
USCI (SPI slave mode) (see Figure 20 and Figure 21)
PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT
t
STE,LEAD
STE lead time
STE low to clock
2.2 V/3 V 50 ns
t
STE,LAG
STE lag time
Last clock to STE high
2.2 V/3 V 10 ns
t
STE,ACC
STE access time
STE low to SOMI data out
2.2 V/3 V 50 ns
t
STE,DIS
STE disable time
STE high to SOMI high impedance
2.2 V/3 V 50 ns
t
SIMO input data setup time
2.2 V 20
ns
t
SU,SI
SIMO input data setup time
3 V 15
ns
t
SIMO input data hold time
2.2 V 10
ns
t
HD,SI
SIMO input data hold time
3 V 10
ns
t
SOMI output data valid time
UCLK ed
g
e to SOMI valid;
2.2 V 75 110
ns
t
VALID,SO
SOMI output data valid time
UCLK
edge
to
SOMI
valid;
C
L
= 20 pF
3 V 50 75
ns